E-mail: zzdybriquette@163.com
Contact Us

ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD
Add:  No.1,Industrial Zone of Nanyang Village, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel: +86-371-63782063
Mobile: +86-13526658007
Fax: +86-371-63782062 

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
The Adjustment Of Roll Misalignment And Clearance Of Rollers Press
Mar 03, 2017

The adjustment of roll misalignment and clearance of rollers press


Briquette Press Machine with double roller displacement occurs after the final shape of the ball will

produce the flash or suppress the phenomenon is not tight. The impact of transport and waste of 

materials. The solution is to adjust the ball machine. But many users do not know how to carry out.

rollers for briquettes

First to check carefully on the product quality of molding briquettes eggs, sometimes there will be some

small, if not timely treatment will seriously affect the normal production, the next batch of 

products such as: double roller misalignment problem, then how should we solve?


The steps are as follows: loosen the adjusting disc on the auxiliary roller gear fastening bolts

with screw and the gear adjustment from the top plate, the roller can rotate inwards, gear for a

week, for the purpose of eliminating gear clearance, launched the top wire. Then turn the ball on

the driven roller is, should pay attention to do this work: when the ball is a ball roll side 

below the main roller ball 1-2mm 1-2mm, and then tighten the fastening bolts of the adjusting disc,

the direction of rotation gear, check whether the pressure ball machine two roller ball of 

purpose, such as did not reach the ideal state, loosen the fastening bolt, the new adjustment, 

until after to tighten all fastening bolts.

coal briquette machine

coal briquette press



If the production of briquette press machine is not enough, it can adjust the dry humidity and feed 

quantity, adjust the roller gap. Methods: the roll gap adjustment screw clockwise oblique iron 

under the pressure screw rod side roll inward moving activities or the board with forceps, so as 

to adjust the.


If the pressure screw rod screw does not move, and open the main plug, loosen the vertical support 

plate and beam connecting bolts, inward oblique iron with a fixed lever, then clockwise twist under

 pressure bar, view the desulfurization gypsum pressure ball machine for roller clearance, 

clearance fit tightened after the vertical support plate and Liang Lian put back the plug bolt.


ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD

Add:  No.1,Industrial Zone of Nanyang Village, Zhengzhou City, Henan Province, China

Contact: Simba Lee

Tel: +86-371-63782063

Mobile: +86-13526658007

Fax: +86-371-63782062 

Skype: simba58007

E-mail: zzdybriquette@gmail.com

website:www.dayang-briquettepress.com




Copyright © Zhengzhou Dayang Briquette Machinery Co.,Ltd All rights reserved.