E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: Industrial Zone, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel/Fax: +86-371-57114464
Mobile: +86-13526658007

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
How To Avoid Rain And Moisture For Briquette Press Machine
Aug 23, 2017

How to Avoid Rain and Moisture for Briquette Press Machine

Recently, China has suffered heavy rain, to our production and life to bring some inconvenience,briquette press equipment built in the indoor plant, naturally can avoid the sun and rain, but if built in the outdoors, must To do a good job of rain and moisture.

briquette press 2.jpg briquette press[1].jpg

Select the outdoor coal briquette machine installed in the installation of the time must be waterproof work. There is a gap between the host and the stand for the equipment in which the suspension is installed. If you encounter rain and snow weather, the water will penetrate the equipment into the gap inside the equipment, causing harm to the equipment. 

press machine and dryer.jpg

Therefore, when the equipment is installed, it should take measures to prevent water and so on, to prevent rainwater from the screw interface into the briquette press machine. The selection of the mounting bracket is also very important, we recommend the use of the original bracket, the original bracket fully take into account the waterproof problem, a reasonable tilt design makes the ball press spin connected slightly higher, even after the bracket into the water, The stent into the column, to avoid entering the coal briquette equipment.

400 briquette press.jpg

If the user to make their own stent, you should fully consider the waterproof factors. In the absence of precipitation in the case of water droplets within the stent, most of the situation is because the operating environment during the day temperature is very high, the water inside the tower into the stent, when the night temperature decreases, the water vapor will be condensed into water droplets, Stent along the wall. When the stent without tilt design, the water droplets will flow along the stent coal briquette machine, causing damage to the equipment. And to avoid the emergence of such a situation, can be used in the stent and pole with rubber mud or silicone and other waterproof materials for closed treatment.

500 press machine (3).jpg

At the same time, in the rainy season to pay attention to the power problem, to prevent the water caused by the short circuit, and even the tragedy of fire.

ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD, who is professional at coal/charcoal/mineral powder briquette press machine and coal/charcoal/mineral briquettes plant designing and manufacturer more than 20 years, service for hunderds of briquettes machine and briquettes plants customers from domestic and abroad! After thousands of redesigning & updating and hundreds of customers test, we are glad to recommend our key technology connect rollers for press machine and chain plate dryer. Connection rollers for briquette press is greatly short the time to change the rollers and save much cost on rollers; New Designing Chain Plate Dryer is famous for its large production capacity upto 25-30tph, less briquettes damage, and strong drying ability final briquettes moisture content less than 5%!

Copyright © Zhengzhou Dayan Briquette Machinery Co.,Ltd All rights reserved.