E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: Industrial Zone, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel/Fax: +86-371-57114464
Mobile: +86-13526658007

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
Coal Briquettes Production Line Debugging And Commissioning Steps
Nov 26, 2017

Coal Briquettes Production Line Debugging and Commissioning Steps


Coal Briquette Production Line need to debugging after set up, briquette production line debugging is very important, and only after the completion of debugging qualified, can be briquette production. How to test and commissiong briquette production line equipment?

customers site 3.jpg

Briquette production line debugging and commissioning steps:

 First, the production line for briquette no-load test, the order is by the back of the equipment one by one to test the motor running direction is correct, briquette production in the host is functioning properly, the bearing temperature is too high, grease added Is the right amount, if abnormal, stop troubleshooting, troubleshooting, before starting the test again.

 5 tons per hour coal briquettes plant.jpg

Second, briquette production line load test run the whole line, the order is started by the back of the equipment one by one, briquette machine operation after the entire line normal operation. First, add a small amount of material, and gradually to normal, check the briquette machine in the machine is boring car, the current is too large, the chute is discharged smoothly, in the event of anomalies, by going to checking one by one by parking, to check and rule out abnormalities Drive again.

 500 press machine (2).jpg briquette press[1].jpg

Finally, the whole line of briquette production line is under trial production. Generally, it should be continuously operated for 4-8 hours without any abnormal situation. If it occurs, it will be parked by one by one after it goes to the station and will be restarted after the fault is eliminated. The time will be recalculated.HIGH PRESSURE BRIQUETTE MACHINE technical knowledge welcome to inquire: zzdybriquette@163.com

dry powder briquette machine.jpg kaolin briquetting plant.jpg

ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD, who is professional at coal/charcoal/mineral powder briquette press machine and coal/charcoal/mineral briquettes plant designing and manufacturer more than 20 years, service for hunderds of briquettes machine and briquettes plants customers from domestic and abroad! After thousands of redesigning & updating and hundreds of customers test, we are glad to recommend our key technology connect rollers for press machine and chain plate dryer. Connection rollers for briquette press is greatly short the time to change the rollers and save much cost on rollers; New Designing Chain Plate Dryer is famous for its large production capacity upto 25-30tph, less briquettes damage, and strong drying ability final briquettes moisture content less than 5%!Latest continuous charcoal making machine,which can make charcoal from sawdust directly, production capacity upto 1000-1500kg/h, and most importantly the charcoal making machine is working by 24 hours and smoking recycle system can recycle the waste gas directly to save furel. welcome your inquiry, thanks. 

high pressure briquette machine 6.jpg high pressure briquette machine 1.jpg


Add:  No.1,Industrial Zone of Nanyang Village, Zhengzhou City, Henan Province, China

Contact: Simba Lee

Tel: +86-371-63782063

Mobile: +86-13526658007

Fax: +86-371-63782062 

Skype: simba58007

E-mail: zzdybriquette@163.com


Copyright © Zhengzhou Dayan Briquette Machinery Co.,Ltd All rights reserved.