E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: Industrial Zone, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel/Fax: +86-371-57114464
Mobile: +86-13526658007

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
Comparative Analysis Of Two Molding Methods Of Coal Briquette Machine
Oct 23, 2018

Comparative analysis of two molding methods of coal briquette machine

The coal briquette machine is characterized by large molding pressure, adjustable number of revolutions of the main engine, and a screw feeding device, which is mainly used for pressing powdery materials which are difficult to form. What is the difference between mechanical forming and hydroforming of a ball press? The following is a brief introduction to the difference between mechanical forming and hydroforming of the coal briquette machine:


Mechanical molding of coal briquette machine

Check whether the electrical parts are normal before starting the machine. Check if the die space of the two rollers are correct. If there is no alignment, open the gear guard and loosen the six screws on the adjustment plate on the driven gear. After the positive and negative rotation of the roller die is aligned, tighten the screws as well. After starting production. Finished product, check whether the double-mixed working surface is matched. If there is any error, the large-gear shroud can be removed, and the outer ring screw of the passive roller gear can be loosened for adjustment.

brown coal briquette making machine 6

Hydraulic forming of coal briquette machine

First check whether the electrical work is normal, and whether the steering of the roller and hydraulic mercury is turning forward. Check that the die holes of the two rolls are aligned, too large or too small. If the two roll die holes are not aligned, the gear cover should be opened, and the six screws of the adjustment plate on the driven gear should be loosened, and the positive or negative rotation can be adjusted, and the screws can be tightened after adjustment. If the distance between the two rollers is large or small, the two shafts on the two sides of the driving wheel should be adjusted on the passive shaft and the positive wheel.


ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD, who is professional at coal/charcoal/mineral powder briquette press machine and coal/charcoal/mineral briquettes plant designing and manufacturer more than 20 years, service for hunderds of briquettes machine and briquettes plants customers from domestic and abroad! After thousands of redesigning & updating and hundreds of customers test, we are glad to recommend our key technology connect rollers for press machine and chain plate dryer. Connection rollers for briquette press is greatly short the time to change the rollers and save much cost on rollers; New Designing Chain Plate Dryer is famous for its large production capacity upto 25-30tph, less briquettes damage, and strong drying ability final briquettes moisture content less than 5%!Latest continuous charcoal making machine,which can make charcoal from sawdust directly, production capacity upto 1000-1500kg/h, and most importantly the charcoal making machine is working by 24 hours and smoking recycle system can recycle the waste gas directly to save furel. welcome your inquiry, thanks. 

Copyright © Zhengzhou Dayan Briquette Machinery Co.,Ltd All rights reserved.