E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: Industrial Zone, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel/Fax: +86-371-57114464
Mobile: +86-13526658007

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
DAYANG BRIQUETTE MACHINERY Helps You Solve The Heat Problem During The Operation Of The Briquetting Press
Jan 15, 2019

DAYANG BRIQUETTE MACHINERY helps you solve the heat problem during the operation of the briquetting press


When the briquette ball press is working for a long time, the body will have a very hot feeling, and the burning will always cause great damage to the equipment. How to solve the heat dissipation problem of the ball press machine better? Don't worry, DAYANG BRIQUETTE MACHINERY is a professional manufacturer for many years and will help you solve this problem. Before installing the ball press, the pipeline should be laid in strict accordance with the electrical specifications, and the strong and weak signal lines should be isolated and worn to avoid interference. In an outdoor open environment, independent external lightning protection measures should be taken. The dome itself should also be well grounded to prevent static buildup and other effects on the dome. When installing, properly connect the power cable, communication cable and video cable. When connecting, carefully refer to the installation instructions to confirm the communication method and corresponding pin definition. Generally, the equipment should be installed in the later stage of construction to avoid a large amount of dust on the construction site from invading the ball machine, directly affecting its use effect and life. The heat dissipation problem during the operation of the ball press must also be considered. Some branded ball machines on the market do not have outdoor models, so they cannot be directly used outdoors, and must be equipped with accessories such as outdoor shields. Pelco outdoor domes come standard with sunshades, heaters, and dual cooling fans to accommodate outdoor harsh or extreme temperature differences. After installing the ore powder ball press, you should first perform single-unit debugging, which can reduce the burden on the whole system debugging. Pelco's domes offer RJ45 connectors for single-unit debugging. By connecting the dome camera to the debugging kit through the RJ45 interface, you can debug the output image of the dome camera, pan/tilt rotation, and lens stretching. You can also enter the dome menu for further initial setup. The above is the solution to the heat dissipation problem of the ball press machine, and solves the problem of heat dissipation of the ball press machine, then the ball press machine can work normally, and the ball press machine after heat dissipation is not prone to any malfunction.

IMG_20180114_130628

Copyright © Zhengzhou Dayan Briquette Machinery Co.,Ltd All rights reserved.