E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: No.1,Industrial Zone of Nanyang Village, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel: +86-371-63782063
Mobile: +86-13526658007
Fax: +86-371-63782062

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
Analysis Of Assembly Points Of Briquette Press Machine
May 24, 2017

Analysis of assembly points of briquette press machine


Coal briquetting press is a kind of briquettes making equipment. It can send all kinds of dry and wet powder to the rolling zone continuously through the pre-press device, and press the dry and wet powder into briquettes under the pressure of the rolling zone. Mainly used in coal, mining, metallurgy, refractory materials, building materials and other industries.

500 press machine (3).jpg 400 briquette press.jpg

In order to ensure the assembly quality of the coal briquettes press equipment, it is necessary to operate in accordance with the technical requirements for assembly of various briquettes press products. Different types of briquetting press assembly technology requirements are not the same, but in the assembly process, there are many work points must be common to abide by the contract.


1, do a good job of cleaning and cleaning parts. Cleaning involves removing residual casting sand, rust, chips, etc.. Especially some important parts, such as Longmen big cutting machine, inner cavity should be painted antirust paint. Grease, rust or adhering chips on parts can be cleaned by using diesel oil, kerosene or gasoline as washing liquid, and then dried by compressed air.


2, matching surface in coordination or connection before, usually need to add lubricant. In particular, the bearing parts in the spindle box parts, the screw nut parts of the lifting mechanism.


3, matching parts with the size should be accurate, assembly size should be re examined or random inspection. For example: the main shaft of the shaft neck and the bearing matching parts, spindle box and bearings with holes and the pitch. Carbon ball press


4 wheel assembly, two gear wheel axis line must be in the same plane and parallel to each other, shall ensure the normal tooth gap, while the axial displacement is less than or equal to 2MM.


5, the joint of the surface should be checked whether it is smooth, whether or not deformation, or else should be trimmed, deburring, ensure that the joint surface contact tight, smooth, not askew.


6, sealing parts should be pressed into the sealing groove parallel, can not distort, damage, scratches, sealing surface.


ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD, who is professional at coal/charcoal/mineral powder briquette press machine and coal/charcoal/mineral briquettes plant designing and manufacturer more than 20 years, service for hunderds of briquettes machine and briquettes plants customers from domestic and abroad! After thousands of redesigning & updating and hundreds of customers test, we are glad to recommend our key technology connect rollers for press machine and chain plate dryer. Connection rollers for briquette press is greatly short the time to change the rollers and save much cost on rollers; New Designing Chain Plate Dryer is famous for its large production capacity upto 25-30tph, less briquettes damage, and strong drying ability final briquettes moisture content less than 5%!


5 tons per hour coal briquettes plant.jpg

Copyright © Zhengzhou Dayang Briquette Machinery Co.,Ltd All rights reserved.