E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: Industrial Zone, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel/Fax: +86-371-57114464
Mobile: +86-13526658007

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
Aiming At The Problem Of Finished Briquettes, How To Adjust The Briquette Press?
Apr 25, 2017

Aiming at the problem of finished briquettes, how to adjust the briquette press

After the dislocation of the press machine, the final shape of the briquettes will produce rough edges or is not tight compaction phenomenon. The impact of transport and waste of materials. The solution is to adjust the briquette machine. But many users do not know how to carry out.

briquettes plant

First to check carefully on the product quality of molding briquettes, sometimes there will be some small, if not timely treatment will seriously affect the normal production, the next batch of products such as: rollers press machine dislocation problem, then how should we solve? 

The steps are as follows: loosen the adjusting disc on the auxiliary roller gear fastening bolts with screw and the gear adjustment from the top plate, the roller can rotate inwards, gear for a week, for the purpose of eliminating gear clearance, launched the top wire. Then turn the ball on the driven roller is, should pay attention to do this work: when the ball is a ball roll side below the main roller ball 1-2mm 1-2mm, and then tighten the fastening bolts of the adjusting disc, the direction of rotation gear, check the desulfurization gypsum pressure ball machine two roll ball is not reached on purpose, such as did not reach the ideal state, loosen the fastening bolt, the new adjustment, until after to tighten all fastening bolts. 

coal briquettes machine

If the production of ball pressing machine is not enough, it can adjust the dry humidity and feed quantity, adjust the roller gap. Methods: the roll gap adjustment screw clockwise oblique iron under the pressure screw rod side roll inward moving activities or the board with forceps, so as to adjust the. 

rollers connection rollers

german rollerspress rollers

If the pressure screw rod screw does not move, and open the main plug, loosen the vertical support plate and beam connecting bolts, inward oblique iron with a fixed lever, then clockwise twist under pressure bar, view the desulfurization gypsum pressure ball machine for roller clearance, clearance fit tightened after the vertical support plate and Liang Lian put back the plug bolt.

briquettes plantsbriquettes plant

ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD, who is professional at coal/charcoal/mineral powder briquette press machine and coal/charcoal/mineral briquettes plant designing and manufacture more than 20 years, service for hunderds of briquettes machine and briquettes plants customers from domestic and abroad! After thousands of redesigning & updating and hundreds of customers test, we are glad to recommend our key technology connect rollers for press machine and chain plate dryer. Connection rollers for briquette press is greatly short the time to change the rollers and save much cost on rollers; New Designing Chain Plate Dryer is famous for its large production capacity upto 25-30tph, less briquettes damage, and strong drying ability final briquettes moisture content less than 5%!


Add:  No.1,Industrial Zone of Nanyang Village, Zhengzhou City, Henan Province, China

Contact: Simba Lee

Tel: +86-371-63782063

Mobile: +86-13526658007

Fax: +86-371-63782062 

Skype: simba58007

E-mail: zzdybriquette@gmail.com


Copyright © Zhengzhou Dayan Briquette Machinery Co.,Ltd All rights reserved.