E-mail: zzdybriquette@163.com
Contact Us

Zhengzhou Dayang Briquette Machinery Co.,Ltd
Add: Industrial Zone, Zhengzhou City, Henan Province, China
Contact: Simba Lee
Tel/Fax: +86-371-57114464
Mobile: +86-13526658007

Skype: simba58007

Wechat: lee58007
E-mail: zzdybriquette@163.com

Home > News > Content
Adjustment Of Material Ratio And Pressure Roller Spacing Of Briquetting Machine
Apr 06, 2017

Adjustment of Material Ratio and Rollers Space of Briquetting Machine


Briquetting equipment has been an important equipment in the industry, can be a variety of powder material compaction molding, so the application of ball press is very wide. DAYANG BRIQUETTE MACHINERY engaged in the production of ball press 20, the production of a complete range of ball press, ball machine quality assurance, high pressure molding rate.

BRIQUETTE PRESS SUPPLIERBRIQUETTE PRESS ROLLERSCOAL BRIQUETTES 

The ratio of the material of the coal briquette machine: in the production of briquette process, the material moisture should be strictly controlled. The ball into the water binder ratio also has several, lime and clay molding water 18-20%; binder adopts pulp or humic acid forming water 10-12%; using compound binder molding water is 11-13%; the use of asphalt binder molding water for 2- 4%; no adhesive forming water for young lignite binderless weathering anthracite extrusion 12-18%; when the water is 15-18% molding without binder molding; when the moisture content is less than 12%. Ball forming machine is the key to the ratio of the material, but also the ball into the ball rate of a guarantee.

PILLOW BRIQUETTESsquare briquettesrollers press

Adjustable of center space of two rollers: in the process of briquetting process the greater the pressure the higher the density, the stronger the strength of the molding. This pressure problem applies to any type, any type of ball press, and the greater the pressure means that the smaller the two roller spacing. However, when the two roller spacing is too small, it will cause a ball phenomenon, if pressure ball machine spacing is too large, it will cause the material transfer to the future and the center of the coal powder, coal forming material will fall down, will not only affect the strength of coal powder, but also made into powder coal is too thick, burr, cinder, and even pressed into a ball. Therefore, the pressure roller pressure roller spacing adjustment is a technical activity, the need for skilled technical personnel to debug.

briquettes plant

ZHENGZHOU DAYANG BRIQUETTE MACHINERY CO., LTD, who is professional at coal/charcoal/mineral powder briquette press machine and coal/charcoal/mineral briquettes plant designing and manufacturer more than 20 years, service for hunderds of briquettes machine and briquettes plants customers from domestic and abroad! After thousands of redesigning & updating and hundreds of customers test, we are glad to our key technology connect rollers for press machine and chain plate dryer. Connection rollers for briquette press is greatly short the time to change the rollers and save much cost on rollers; New Designing Chain Plate Dryer is famous for its large production capacity upto 25-30tph, less briquettes damage, and strong drying ability final briquettes moisture content less than 5%!

Copyright © Zhengzhou Dayan Briquette Machinery Co.,Ltd All rights reserved.